Ultra Smart Thermostats are designed for commercial applications to be automatic, easy to use, smart, cost-effective and energy efficient. Beautifully contoured, Ultra improves guest comfort and satisfaction. Tough, reliable and tamper-resistant.
A variety of models are available for Fancoil, Heat pump, Split System and PTAC applications. Your HotelTech Representative can assist you in selecting the model that best fits your particular application.
24, 120, 208/230 or 277 VAC available.
Approximately 5”h x 3“w x 1”d
2" x 4" or 4" x 4" mounting box. Wall plates available.
Commercial-grade, high density, high impact, textured plastic. Tough and tamper-resistant.
LCD with Backlighting. Easy to read; shows selected Set Temperature and Fan Mode. Approximately 1-3/4“w x 1-1/4”.
24V AC/DC: 1 amp Max. per stage; Not to exceed 2 amps Total Combined Load
110-120 VAC: Pilot Duty Heat or Cool, 2 amps Max; Max Fan, 4.4 FLA; 26 LRA
208-240 VAC: Pilot Duty Heat or Cool, 2 amps Max; Max Fan, 2.2 FLA; 13 LRA
265-277 VAC: Pilot Duty Heat or Cool, 2 amps Max; Max Fan, 1.8 FLA; 10.8 LRA
Certified to UL and CSA standards.
Selectable Range: 60°-90°F (16°-29°C).
Adjustable Range ("Limits"): 66°F (19°C) Cooling limit. 82°F (30°C) Heating limit.
Push button, red and blue arrows, for easy temperature selection in 1°F or 1°C increments.
Press to start up display. Default set temperature upon start-up is 72°F (22°C). Adjustable.
Pressing the °F/°C button allows the user to change from a °F to °C display.
Press to toggle through available Fan Speed or Mode options. One, two or three speed models are available. Device can automatically select optimal fan speed for performance and energy efficiency.
User-friendly, automatic switching between heating and cooling. Heat/Cool Temperature Dead Band is 4°F (2°C). Cool-only and Heat only models also available.
Designed to handle typical brown-out/surge situations.
For engineering diagnostic purposes, the thermostat can interchangeably display the actual room temperature AND the set temperature and fan status by simultaneously pressing and holding the red and blue buttons for 7 seconds, then releasing.
Simple and hidden, for qualified personnel to field-customize features according to their HVAC system and to their energy conservation requirements.
Specifications subject to change.
Combines beauty and brains with a sleek design and easy-to-use features.
CALL for a QUOTE and MODEL that best fits your application
Matching wall cover plates
Custom Wire Connector Plugs
Two-Button model for common areas